Tuesday, October 13, 2009

Les Paul blueprint

les paul




Something that might interest amateur guitar builders, blueprint for a Les Paul model (if you click on the smaller pic, you can access bigger size). There will be more later.

Edit: I do send the real size blueprints on request but please send me your e-mail address when asking, it saves time! Also I've been sending about a hundred blueprints but never had any feedback afterward - if you ever build a guitar out of them, please let me know and credit the blog! thank you.

17 comments:

  1. terima kasih bro...inilah yang selama ini saya cari..

    ReplyDelete
  2. you're welcome... real size blueprint can be sent to your e-mail on request.

    ReplyDelete
    Replies
    1. ive searched for this kinds of blueprints

      please send me real size blue prints for SG LP and TELE

      Thanks in advance

      Awesome Blueprints!

      Delete
    2. need your e-mail address for that...

      Delete
  3. Thanks for sharing these plans! One question, I see the headstock angle is at 13 degrees. From what I read around, it should be 17?

    Thanks again.

    ReplyDelete
  4. sorry, I didn't make these blue prints, I'm just transmitting, so I cannot tell more than what there is...

    ReplyDelete
  5. Hie can you send me full size plan for the SG and Les paul please.

    If you have ES 335 will be excellent as well.

    Awaiting your reply.

    ReplyDelete
  6. sorry, don't have the ES335... to receive the blueprints, please send your e-mail address in a next comment (not published).

    ReplyDelete
  7. Hi Bertram
    can you send me full size plan for the SG Les paul and the Tele please.

    thx Daniel

    ReplyDelete
  8. to daniel and others, to have the blueprints sent, please leave me your address in a comment that I won't publish, otherwise there is nothing I can do !

    ReplyDelete
  9. hi,can you email the les paul blue print to me?

    ReplyDelete
  10. yes, post here your e-mail address (won't be publish!)

    ReplyDelete
  11. Im adding a bixby to my 61 melody maker. Im wanting to set it up like a les paul. It a complete re build .almi st done. I just need the placement of the holes for the tail peace dont know were to put the holes so it fits. The holes wouldn't fit it had a mystro on it but I never had possession of it I just was given the PAF in it and a block. If u could help me it would b so awesome. Thank you.

    ReplyDelete
    Replies
    1. hi Nigel, I don't have a Les Paul so I don't know how a bigsby is fixed on them, but since it's an archtop and the melody maker is a flat top, you cannot do it the same... and when I put a Bigsby on my telecaster, I just put it where it felt right! good luck.

      Delete
  12. Received your email, thanks a lot mate, I'll send you pictures when I'm done with the building process. Cheers :-)

    ReplyDelete
  13. Hey!
    I would love you to send me the prints of a Les Paul. I will use it for a school project in Cad, i will build it virtually.
    Best Regards
    Emil Sjöqvist

    ReplyDelete
    Replies
    1. no problem, but I will need your e-mail address.

      Delete

gUitarREN's facebook

gUitarREN on Facebook