Mmmm.... :/ I think the lower end of body must be wider, close to semi-hollow guitar dimensions. Some narrow bodies looks like they were cut to fit the case or luthier forgot about upper cutaway on DC body. So here is my Scott French-like guitar. I used curve with minimum of knots (My early work with graphic editor). http://cs851.vkontakte.ru/u29309669/92962965/x_5d761a41.jpg
I like deep cutaways but dislike narrow-body Fodera designs or their clones.
ReplyDeleteTwo my concepts (aug 2009-feb 2010):
http://cs10287.vkontakte.ru/u29309669/92962965/x_2598cb9a.jpg
http://cs10287.vkontakte.ru/u29309669/92962965/x_daa46279.jpg
*it could be repeat cause my browser didn't show confirmation of previous post :/
I really like some Scott French designs, such as http://www.scottfrench.com/i/Finished%20Customs/Dave%20Kuzy's%20SF3%20Singlecut%20Guitar/09
ReplyDeleteMmmm.... :/
ReplyDeleteI think the lower end of body must be wider, close to semi-hollow guitar dimensions. Some narrow bodies looks like they were cut to fit the case or luthier forgot about upper cutaway on DC body.
So here is my Scott French-like guitar. I used curve with minimum of knots (My early work with graphic editor).
http://cs851.vkontakte.ru/u29309669/92962965/x_5d761a41.jpg