As I started cutting the pickup cavity, I decided to get another pickup and left the thing unfinished. I then ordered a dual-rail single humbucker that has the big advantage to be splitable (it's a 6-string one but in the neck position it should fit a 7-string). The aluminium plate will hide the wrong cut once it's properly modified...
Also the model that I made out of cardboard was thin and didn't reveal that the back of the lower horn is somehow a little bit bothering to access the high notes, so I will modify it too... But I don't shred so it's not a big issue - this part of the neck I use mostly with a bottleneck.
No comments:
Post a Comment